class
class
class

Super matt lime-based textured coating

for INTERNAL and EXTERNAL environments

APPLICATION CYCLE FLY:

Surface preparation: thoroughly clean the surfaces (walls and plasterboard) to be decorated by removing all impurities using brushes and abrasive paper.

  • FISSACRIL

 Diluted with water in a ratio of 1:3

 Wait 4-5 hours.

 

  • BOTTOM FIRST FLY

Dilute 10 to 15% with water. Application by brush or roller.

  •   APPLICATION FINISH
  Apply the first coat of VOLARE
  with a stainless steel trowel, distributing the product evenly
  over the entire surface.

  •   After 6-8 hours, apply the second coat of VOLARE by squeezing the product.

  to smooth it out and for any imperfections, go over the stainless steel trowel first

  of the start of product drying.

  After 24 hours sand with FLEX and P180-220 sanding papers

                                            after thorough sanding, clean the walls thoroughly

                                            from residual dust

  • To obtain the final SOFT TOUCH effect, apply a coat of VOLARE ANTIACQUA with a sponge or brush.

evenly over the entire surface, giving it water-repellent properties and maintaining the

breathability of the wall.

 

Product characteristics VOLARE: FISSACRIL FLY
Dilution: Ready to use.
Drying time: Complete drying in 24 hours.
Theoretical yield: 1 sqm/kg (2 coats).
Diluted 1:3 with water 20mq/lt
according to substrate absorptionFONDO PRIMA VOLARE
7mq/kg (single coat).
1mq/lt (2 coats).

WATERPROOF FLY
7-8 sqm/lt

 

 

 

 

[/fusion_tab].

Surface preparation: thoroughly clean the surfaces (walls and plasterboard) to be decorated by removing all impurities using brushes and abrasive paper.

  • FISSACRIL

 Diluted with water in a ratio of 1:3

 Wait 4-5 hours.

  • BOTTOM FIRST FLY

Dilute 10 to 15% with water. Application by brush or roller.

  •   APPLICATION FINISH
  Apply the first coat of VOLARE
  with a stainless steel trowel, distributing the product evenly
  over the entire surface.

  •   After 6-8 hours, apply the second coat of VOLARE by squeezing the product.

  to smooth it out and for any imperfections, go over the stainless steel trowel first

  of the start of product drying.

  After 24 hours sand with FLEX and P180-220 sanding papers

                                            after thorough sanding, clean the walls thoroughly

                                            from residual dust

  • To obtain the final SOFT TOUCH effect, apply a coat of VOLARE ANTIACQUA with a sponge or brush.

evenly over the entire surface, giving it water-repellent properties and maintaining the

breathability of the wall.

Product characteristics VOLARE: FISSACRIL FLY
Dilution: Ready to use.
Drying time: Complete drying in 24 hours.
Theoretical yield: 1 sqm/kg (2 coats).
Diluted 1:3 with water 20mq/lt
according to substrate absorptionFONDO PRIMA VOLARE
7mq/kg (single coat).
1mq/lt (2 coats).

WATERPROOF FLY
7-8 sqm/lt

 

 

[/fusion_tabs][/fusion_tabs].