class
The two-component microparticulate cement mortar.
class

Microparticulated cement

for Decorated Floors and Walls

According to your style!

APPLICATION CYCLE:

    MICROUNIFORM
    Uniform impregnating agent
    Ready to go.
    Roller - Brush.

    MICROPRIMER ATTAC
    Very high adhesion primer
    Ready to go.
    Spatula - Brush (5% H2O).
    MICROLOGGIA 5F
    Fibre-reinforced microcement.
    Two-component with MICROPRIMER BI (4 : 1)
    (Microloggia = 80% + Microprimer Bi = 20%)
    For flooring, apply fibre mesh (recommended type 70-80g)
    Spatula.
    MICROPRIMER BI
    (Dilutions 1:3 with water)
    MICROLOGGIA 3
    Microcement finish.
    Two-component with MICROPRIMER BI (4 : 1)
    Spatula.
    For a smooth and more compact final effect it is advisable to apply 2 coats.
    Two different types of application cycle are possible:
    Twenty-four hours after the application of MICROLOGGIA 5F(to promote complete drying of the product),
    depending on the two cases, proceed with the application of MICROPRIMER BI
    (recommended for large areas to facilitate application) .
    CYCLE 1:
    (Application 1 coat of MICROLOGGIA 5F and 1 coat of MICROLOGY3).(Apply *MICROPRIMER BI between Microloggia F5 and Microloggia 3)
    CYCLE 2 for smoother and more compact surfaces:
    (Application 1 coat of MICROLOGGIA 5F and 2 coats of MICROLOGY3).
    (Apply *MICROPRIMER BI between the last two coats of MICROLOGGIA 3)
    In order to even out the absorption of the substrate,
    At the end of the 48-72h processing time, apply one coat of MICROUNIFORM.
    After approx. 2-4 hours, apply the first coat of :
    MICROVETRO BI Opaque or Glossy.
    (Apply the second coat after 4-6 h for the Opaque glaze and 6-8 h for the Glossy glaze). For high-strength flooring, 2-3 coats are recommended.
    [/fusion_tab].

     

    MICROSUPER 7
    Adhesive putty powder
    For FIBRE NETWORK application.
    Second coat application without mesh.

    MICROUNIFORM
    Uniform impregnating agent
    Ready to go.
    Roller - Brush.
    MICROLOGGIA 5F
    Fibre-reinforced microcement.
    Two-component with MICROPRIMER BI (4 : 1)
    (Microloggia = 80% + Microprimer Bi = 20%)
    Spatula.
    MICROPRIMER BI
    Always recommended for tiled floors. (Dilution 1:3 with water)
    MICROPRIMER BI Colorable according to swatch MICROLOGGIA
    MICROLOGGIA 3
    Microcement finish.
    Two-component with MICROPRIMER BI (4 : 1)
    For flooring it is advisable to apply 2 coats.
    Two different types of application cycle are possible:
    Twenty-four hours after the application of MICROLOGGIA 5F(to promote complete drying of the product),
    depending on the two cases, proceed with the application of MICROPRIMER BI
    (always recommended for floors to aid application) .
    CYCLE 1:
    (Application 1 coat of MICROLOGGIA 3).
    (Apply *MICROPRIMER BI between Microloggia F5 and Microloggia 3)
    CYCLE 2 for smoother and more compact surfaces:
    (Apply 2 coats of MICROLOGGIA 3).
    (Apply *MICROPRIMER BI between the last two coats of MICROLOGGIA 3)
     
    Finally, at the end of the 48-72 hour processing time, apply a coat of MICROUNIFORM.
    After approx. 2-4 hours, apply the first coat of :
    TWO-COMPONENT POLYURETHANE CLEARCOAT, MATT OR GLOSSY.
    (Apply the second coat after 4-6 h for the Opaque glaze and 6-8 h for the Glossy glaze). For floors, 3 coats are recommended.
    [/fusion_tabs][/fusion_tabs].